Q: Does the Garmin Delta Upland XC have a Barklimiter feature?
A: Yes, the Delta Upland XC does have a Barklimiter function. This feature will automatically correct the dog when a bark is detected. The intensity level can be changed manually on the handheld device.
Q: Will the Garmin Delta Upland XC work with the Original Tri-Tronics G2/G3?
A: No, the Garmin Delta Upland XC will not work with originial Tri-Tronics series. They are only compatible with the Garmin Delta series.
Q: Can multiple handhelds train the same collar?
A: No, the Delta upland XC collar can only be trained by one Delta Upland XC at a time.
Q: Does a beeper come in the box with the system?
A: Yes, a Garmin Delta Upland XC Remote, a collar, and a Beeper all come in the box when bought New or Factory Refurbished.
Q: How loud is the beeper on the Garmin Delta Upland XC?
A: The Beeper that comes with the Garmin delta Upland XC is loud enough for the handler to locate the dog in thick brush. The beeper may startle an inexperienced dog when with the loud noise. It is recommended that the dog is introduced to the beeper before used in the field.
Q: How to pair a Delta Collar with A Garmin Delta Upland XC
A: To start, turn both devices on then select which color the collar will be paired with, use the button on the right side that has the 3 colors (blue,black,red) to do so. Once the color is selected, hold the power button down on the collar at the same time as holding down one of the 3 training buttons on the handheld. The collar will initially beep 3 times, then once more when it is paired on turns off. Once paired, turn the collar back and test to see if it is paired my using a training button, if it is paired the green light will be solid when the devices are communicating.
Q: How to change between the different correction modes
A: To change between the correction modes, you will start with the device on. The press the button on the lower left hand side below the power button labeled “Mode”. Then you can choose between the 3 different settings. The letters stand for Vibration (V), Constant Shock (C), Momentary Shock (M), and Tone (T).
Q: Turning the Barklimiter on the Garmin Delta Upland XC
A: To turn on the Barklimiter, it must be enabled on the device itself. To enable the Barklimiter, select the Dog barking icon on the top left side of the device. The collar must be in a close proximity for the Delta collar and Delta Upland XC to communicate. When the collar’s Barklimiter is enabled, the LED display will flash 3 times.