Step By Step Help How to Repair Dog fence Wire Break

Repair Fence How-To Video

Watch now

Prefer a video? Click here to watch!

Break Finder Kit Install wire in ground and dirt

Strip the Wire Ends:

Begin by stripping about ½ inch of insulation from each end of the broken wires.
Break Finder Kit Install Splice Kit in ground spliced and spun together ready for splice install

Twist the Wires Together:

Twist the exposed ends tightly together. Once connected, trim the twisted section slightly so it fits neatly inside the wire nut.
Break Finder Kit Install Splice Kit in ground wire spliced fixed and capped

Secure with the Wire Nut:

Screw the wire nut on tightly to ensure a solid connection. This step creates the internal portion of the splice.
Break Finder Kit Install Splice Kit open splice

This is the inside of the splice.

You can see the protective gel inside of it, this is what waterproofs your splice.
Break Finder Kit Install Splice Kit in ground hand inserting the wire

Insert into the Waterproof Splice Cap:

Push the wire nut and connected wires into the waterproof splice cap. The protective gel inside the cap will surround the connection to seal out moisture. It’s normal if a bit of gel squeezes out around the edges.
Break Finder Kit Install Splice Kit in ground with wire and super glue

Snap the Cap Closed:

Once the wires are fully seated, snap the cap closed securely. Your connection is now waterproof and protected.
Break Finder Kit Install Splice Kit in ground

Re-bury the Repaired Section:

Place the repaired section of wire back into the ground and bury it. Your electric dog fence is now fully repaired and ready for use.