$19.99
$19.99
$19.99
$19.99
Use the button to power on or off your unit.
Use the 3 training keys to correct your dogs. The keys can be customized to your needs in the settings of your device.
This slot is located behind the Alpha Lithium Ion Battery it is used to insert a Garmin Huntview Chip or an SD card for extra storage.
Plug your device in using the charging port below to recharge your lithium-ion battery.
Use training key enter along side the other training keys to enter any information that has been changed.
This backplate is used to protect your Garmin Lithium Ion battery as well as the internal components of the device.
Use these two keys to scroll between dogs along side the training keys on the front of the units.
This Antenna connector is used to connect your Antenna or Quick Connects to your device.
The GPS antenna is used to communicate with satellites. Which will show the location of the device.
The LED lights on the TT25 are used to enhance visibility at night. The TT25's offer multiple different color options for the LED Lights.
The indicator light is used to show the status of the collar. This is where you can easily check to see if your collar has picked up GPS signal.
Use the power button to turn on your device.
The prongs on the collars are used to correct your dog. All correction have to be done through a compatible Alpha handheld.
This is the charging port for the TT25 collars. Use the clip included with the collar to easily charge your device.
The VHF is used to send clear signals back and forth from your dog tracking devices.
The Antenna Keeper is used to securely hold the antenna to the collar. This prevents the antenna from flopping around, dragging the ground, and getting snagged. With Outdoor Dog Supply you are able to add a free brass name tag to your antenna keeper for extra security.
The GPS antenna port is used to screw down the GPS antenna. You are able replace the GPS antenna in the TT25's.
Use the button to power on or off your unit.
Use the 3 training keys to correct your dogs. The keys can be customized to your needs in the settings of your device.
This slot is located behind the Alpha Lithium Ion Battery it is used to insert a Garmin Huntview Chip or an SD card for extra storage.
Plug your device in using the charging port below to recharge your lithium-ion battery.
Use training key enter along side the other training keys to enter any information that has been changed.
This backplate is used to protect your Garmin Lithium Ion battery as well as the internal components of the device.
Use these two keys to scroll between dogs along side the training keys on the front of the units.
This Antenna connector is used to connect your Antenna or Quick Connects to your device.
The GPS antenna is used to communicate with satellites. Which will show the location of the device.
The LED lights on the TT25 are used to enhance visibility at night. The TT25's offer multiple different color options for the LED Lights.
The indicator light is used to show the status of the collar. This is where you can easily check to see if your collar has picked up GPS signal.
Use the power button to turn on your device.
The prongs on the collars are used to correct your dog. All correction have to be done through a compatible Alpha handheld.
This is the charging port for the TT25 collars. Use the clip included with the collar to easily charge your device.
The VHF is used to send clear signals back and forth from your dog tracking devices.
The Antenna Keeper is used to securely hold the antenna to the collar. This prevents the antenna from flopping around, dragging the ground, and getting snagged. With Outdoor Dog Supply you are able to add a free brass name tag to your antenna keeper for extra security.
The GPS antenna port is used to screw down the GPS antenna. You are able replace the GPS antenna in the TT25's.
- Outdoor Dog Supply -
We warranty what we sell! See warranty page for details.
We use our products, we can troubleshoot any problems
We will ship your order in 24-48 hours or less!
!